Tyson Foods Inc. is one of the world's largest processors of chicken, beef, and pork, and operates over 100 production facilities, mostly across the USA. Chicken processing is at the cornerstone of their business, and Tyson supplies chicken products to some of the biggest retail food chains in the country, including KFC, McDonald's, Burger King, Wendy's and Wal-Mart.
At the Berryville plant in Arkansas, Tyson produces a range of different chicken products that begin as a liquid 'chicken slurry', transported via a large network of pipes by vacuum pump to various parts of the plant.
It’s a major undertaking each day and involves the removal and replacement of over 60 flexible connectors as part of the cleaning process. The previous flexible connectors (shown left) were standard ribbed silicon and hose-clamp connectors which were extremely difficult to remove and re-position correctly.
They also did not provide a 100% sealed solution, with leakage of the slurry commonplace, representing an additional hygiene challenge.
In an effort to contain the leakage, staff had resorted to using tape on the outside of the connectors – and this tape also then had to be removed and replaced during the cleaning process.
Tyson’s Senior Industrial Engineer for the Berryville Plant, Mark Bromley, had heard about BFM® fitting through a local engineering company, and contacted Authorized BFM® Distributor, National Filter Media (NFM), based in Louisiana.
NFM’s Technical Sales Team visited Tyson Berryville and worked with Mark and the team on the installation of three trial BFM® fittings.
Initially, they trialled two BFM® fittings as a connection for transporting boneless chicken slurry from a large hopper to the suction port of a Sine Meat Pump, and another one in a 6" Vacuum system, pulling tumble marinated chicken from a large accumulation hopper to a scale batching system.
To enable easy access during the cleaning process, much of Tyson’s equipment is actually mounted on wheels, which initially presented a challenge with small sections of piping being ‘sucked’ in together because of the vacuum’s effect on the flexible connector section. A simple clamp bracing system was developed by Tyson to keep the spigots apart (shown below), but still allow access to remove the connector if needed between cleaning cycles.
“The system is 100% sealed during both the processing and cleaning operations which means there is much less general ‘housekeeping’ required,” said Chris Clifford, Site Maintenance Manager at the Berryville plant. “The BFM® fitting system has also meant that the dismantling and reinstallation process is so much faster for each cleaning cycle. The simple snap-fit connectors are always installed correctly in exactly the right position.”
After the initial trial, Tyson Foods were so impressed with the performance of BFM® fitting, they wanted to look at installations throughout the plant.
"We gave the team there hands-on BFM® fitting demonstrations during conference breaks and made a full presentation to almost 250 of their Plant and Operations managers as part of the day's agenda. The response was extremely positive!"
Tyson Foods have calculated that at the Berryville Plant, they have saved over US$225,000 per year in labour costs alone since installing the BFM® fitting system – that’s a 90% saving. They have now replaced virtually all of their flexible connections in the plant as maintenance has allowed, and more Tyson plants will be installing the BFM® fitting system in the coming years.
Blair and the team at BFM® see this application as a great example of thinking outside the square in terms of the possibilities for the use of BFM® fitting system. "Traditionally, our products have been installed on dry bulk handling process lines, but these installations processing a slurry under significant vacuum is a fantastic endorsement of the versatility and performance quality of the BFM® fitting system."
Find out more about BFM® fitting in the food industry.